Araldite 2042 Rapid Cure Polyurethane adhesive for most plastics – Perigee Direct
Product Description Araldite® 2042 A/B polyurethane adhesive is a two-part, rapid-curing system that is specifically formulated for bonding plastics including polycarbonate, ABS, nylon, and 1Metton® with minimal substrate preparation. Araldite® 2042 A/B polyurethane adhesive has also been used successfully for bonding
Product Description
Araldite® 2042 A/B polyurethane adhesive is a two-part, rapid-curing system that is specifically formulated for bonding plastics including polycarbonate, ABS, nylon, and 1Metton® with minimal substrate preparation. Araldite® 2042 A/B polyurethane adhesive has also been used successfully for bonding materials with differing CTEs, e.g., nylon to stainless steel. Once cured, it features good environmental stability and impact resistance.
Please Note: These cartridges are designed to work best with a 50ml Dispensing dispenser. We advise you use the correct Dispenser to maximize efficiency and minimize waste. If you do not have one, please check out our Dispensers; all are excellent products and have our seal of approval.
If you prefer not to use a Dispenser, there is an option for a manual hand plunger or a caulking dispenser adapter that you can use for fast small jobs.
Features
Rapid Cure
High Strength
Excellent Flexibility
Convenient Mix Ratio
Bonds a Wide Variety of Materials
Impact Resistant
Environmentally Stable
Applications
Polycarbonate
ABS
Nylon
Metton
Bonding Materials With Differing CTEs, e.g. Nylon to Stainless Steel
Storage
When stored in a dry place in their original sealed containers at a temperature within 36°F to 104°F (+2°C and +40°C) both components of Araldite® 2042 A/B have a 1 year shelf-life from date of shipment. Araldite® 2042 A/B should not be exposed to direct sunlight. The temperature of both components should be above 18°C (65°F) prior to mixing. These products are moisture sensitive and are packaged under a blanket of dry nitrogen. After opening a container, re-blanket with dry nitrogen and then tightly reseal containers.
Additional information is available by consulting the Technical Data Sheet (TDS). Just ask for it!
Urethane & Polyurethane (PUR) Adhesives – tagged “ABS Plastic
Araldite Adhesives
FMSC - Araldite 2042 Polyurethane Adhesive - Pink
Products - Epoxy Materials - Epoxy Adhesives - Polytek Development
SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments; effectively
Araldite Standard Heavy Duty Adhesive | Ultra Strong Epoxy Glue | Solvent-Free Professional Grade Strength for All Materials | Slow Cure for Bonding
Araldite Rapid - Bryan Watkins & Son Ltd
SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments; effectively
Araldite Standard Heavy Duty Adhesive | Ultra Strong Epoxy Glue | Solvent-Free Professional Grade Strength for All Materials | Slow Cure for Bonding
Araldite Heavy Duty Epoxy Adhesive
Araldite Rapid Epoxy Adhesive 24ml Syringe
H2O Glue Epoxy 200ml - Chemical Concepts
Product Description, Araldite® 2042 A/B polyurethane adhesive is a two-part, rapid-curing system that is specifically formulated for bonding plastics
Araldite 2042 Rapid Cure Polyurethane adhesive for most plastics
Lord 7545 A/G 50ml Urethane Adhesives - Chemical Concepts
Araldite – tagged “rapid cure” – Perigee Direct
Araldite 2042 Rapid Cure Polyurethane adhesive for most plastics