KIMYA - PETG Carbon Filament

KIMYA PETG Carbon Filament The Kimya PETG Carbon 3D filament is a mixture of PETG and carbon fibers. The addition of carbon fibers to PETG provides high levels of mechanical performance. Thanks to its rigidity, the PETG Carbon is highly valued in the production of special parts, notably in the paramedical and automotive fields. The Kimya PETG Carbon 3D filament has the following properties: High rigidity Improve ratio between: Ease of printing / Rigidity Complies with the REACH standard Product Dimensions: 20.7 × 20.5 × 6 cm; 0.8 kg FILAMENT PROPERTIES PROPERTIES TEST METHODS VALUES Density ISO 1183-1 1.28 g/cm3 Moisture rate INS-6711 < 10 % Melt flow index (MFI) ISO 1133-1 (@225°C – 2.16 kg) 9.7 g/10min Glass transition temperature (Tg) ISO 11357-1 DSC (10°C/min - 20-300°C) 76 °C PRINT PARAMETERS AND SPECIMENS DIMENSIONS PRINTING DIRECTION XY Printing Speed 40-70 mm/s Infill 100% - rectilinear
KIMYA PETG Carbon Filament The Kimya PETG Carbon 3D filament is a mixture of PETG and carbon fibers. The addition of carbon fibers to PETG provides high levels of mechanical performance. Thanks to its rigidity, the PETG Carbon is highly valued in the production of special parts, notably in the paramedical and automotive fields. The Kimya PETG Carbon 3D filament has the following properties: High rigidity Improve ratio between: Ease of printing / Rigidity Complies with the REACH standard Product Dimensions: 20.7 × 20.5 × 6 cm; 0.8 kg FILAMENT PROPERTIES PROPERTIES TEST METHODS VALUES Density ISO 1183-1 1.28 g/cm3 Moisture rate INS-6711 < 10 % Melt flow index (MFI) ISO 1133-1 (@225°C – 2.16 kg) 9.7 g/10min Glass transition temperature (Tg) ISO 11357-1 DSC (10°C/min - 20-300°C) 76 °C PRINT PARAMETERS AND SPECIMENS DIMENSIONS PRINTING DIRECTION XY Printing Speed 40-70 mm/s Infill 100% - rectilinear Infill Angle 45°/-45° Nozzle Temperature 220-260°C Bed T° 60-100°C PRINTED SPECIMENS PROPERTIES PROPERTIES TEST METHODS VALUES MECHANICAL PROPERTIES Tensile modulus ISO 527-2/5A/50 4,541 MPa Tensile Strength ISO 527-2/5A/50 52.9 MPa Tensile strain at strength ISO 527-2/5A/50 2.4 % Tensile Stress at Break ISO 527-2/5A/50 41.3 MPa Tensile strain at break ISO 527-2/5A/50 2.6 % Flexural modulus ISO 178 2,648 MPa Flexural stress at conventional deflection (3,5% strain)* ISO 178 80.4 MPa Flexural stress at break ISO 178 80 MPa Charpy impact resistance ISO 179-1/1eA 4.1 kJ/m² Shore Hardness ISO 868 75D Note 1 *According to ISO 178, end of the test at 5% deformation even if there is no specimen break. Note 2 The data should be considered as indicative values - Properties can be influenced by production conditions.