M5StickC PLUS2 ESP32 Mini IoT Development Kit
The M5StickC PLUS2 is a refined version of the M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip with built-in WiFi. Packed into its compact size are various hardware components, including infrared, RTC, a microphone, and much more! Its 1.14" TFT screen has a resolution of 135 x 240, driven by the ST7789V2. With an upgraded 200mAh battery and support for HAT and Unit series products, this development tool is versatile and beginner-friendly, making it easy to prototype IoT projects. The M5StickC PLUS2 opens up creative possibilities without overwhelming complexity. Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within England/Wales. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why? Power On: Wake-up can be started by pressing "BUTTON C" for more than 2 seconds, or an
Official Raspberry Pi reseller. The ultimate Raspberry Pi & maker superstore with all of the biggest brands under one roof. Raspberry Pi Zero stockist. Next Day delivery available.
The M5StickC PLUS2 is a refined version of the M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip with built-in WiFi. Packed into its compact size are various hardware components, including infrared, RTC, a microphone, and much more! Its 1.14 TFT screen has a resolution of 135 x 240, driven by the ST7789V2. With an upgraded 200mAh battery and support for HAT and Unit series products, this development tool is versatile and beginner-friendly, making it easy to prototype IoT projects. The M5StickC PLUS2 opens up creative possibilities without overwhelming complexity.
Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within England/Wales. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?
Power On:
Wake-up can be started by pressing BUTTON C for more than 2 seconds, or an IRQ signal triggered by RTC regularly. After triggering the wake-up signal, the hold(G4) pin needs to be set to a high level (1) in program initialization to maintain the power supply, otherwise the device will enter the shutdown state again.
Power Off:
When there is no USB external power supply, press BUTTON C for more than 6 seconds; Or when there is no USB external power supply, set HOLD(GPIO4)=0 in the program operation, that is, to achieve power off.
Features
ESP32-PICO-V3-02-Base,support WiFi
Built-in 6-Axis IMU
IR transmitter
Microphone
RTC
Buttons, LCD(1.14 inch)
Built-in Lithium Polymer Battery@200mAh
Extendable Socket
Built-in Passive Buzzer
Wearable & Wall mounted
Compatible with multi-platform development:
UIFlow
MicroPython
Arduino
.NET nanoFramework
Specifications
Resources
Parameters
ESP32
ESP32-PICO-V3-02
240MHz dual core,support wifi,2 MB SPI PSRAM,8 MB SPI flash
PSRAM
2 MB PSRAM
Flash
8 MB flash
Power Input
5V @ 500mA
Port
TypeC x1, GROVE (I2C+I/0+UART) x1
LCD screen
1.14, 135 x 240 Colorful TFT LCD, ST7789v2
Button
Custom button x3
LED
Green LED
MEMS
MPU6886
Buzzer
Built-in buzzer
MIC
SPM1423
RTC
BM8563
Battery
200mAh @ 3.7V
Antenna
2.4G 3D Antenna
PIN port
G0, G25/G36, G26, G32, G33
Operating Temperature
0°C to 60°C
Case Material
Plastic (PC)
Product Size
48 x 25 x 13mm
Package Size
114 x 64 x 23mm
Product Weight
17g
Package Weight
24.8g
Driver Installation
Click the link below to download the driver that matches the operating system. There are currently two driver chip versions, CP34X (for CH9102) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. If the program cannot be downloaded normally (the prompt is overtime or failed to write to target RAM), you can try to reinstall the device driver.
Driver Name
Applicable Driver Chip
Download Link
CH9102_VCP_SER_Windows
CH9102
Download
CH9102_VCP_SER_MacOS v1.7
CH9102
Download
Resources
Product Wiki
Schematic
ESP32-PICO-V3-02
Package Contents
1x M5StickC Plus2
M5StickC PLUS2 ESP32 Mini IoT Development Kit
M5STACK ESP32 CORE2 IoT Development Kit User Manual
M5Stack M5StickC PLUS ESP32-PICO Mini IoT Development Kit - OKdo
M5StickC PLUS2 ESP32 Mini IoT Development Kit
M5Stack Universal IOT Experiment Kit for ESP32 (SHT30) - RobotShop
M5StickC PLUS2 ESP32 Mini IoT Development Kit
M5Stack M5StickC PLUS ESP32-PICO Mini IoT Dev Kit — SensiML Documentation
M5Stack StickC Plus2 ESP32 Mini IoT Development Board WiFi ESP32-PICO-V3-02 Kit
Most featured ESP32 per cm² - M5StickC Plus - NotEnoughTech
M5Stack - Modular Rapid ESP32 IoT Development Board - ESP32 dev kits– m5stack-store