Plioir en os 120 mm pointu, The Solution Shop

EP Branch Multi-port Tee features 3/4 or 1 ProPEX inlet with 1/2 ProPEX branch outlets. The Multi-port Tee is made of EP, which is proven in demanding hot-water applications.Note: ProPEX Tool is required. ProPEX Rings sold separately. Engineered Polymer (EP) Branch Multi-port Tee is used in hot and cold domestic potable water distribution systems. The EP Branch Multi-port Tee is available with ¾ or 1 ProPEX inlets and ½ ProPEX outlets.

Uponor Wirsbo Q2237550 EP Branch Multi-Port Tee, 3 Outlets, 3/4

Calaméo - MODES&TRAVAUX - Novembre 2022 Compressed

This is a Carl Zeiss W-PI 10x/23 microscope focusable eyepiece. This eyepiece will fit in any 30mm eyetube. This is used in good working condition.

Carl Zeiss W-PI 10x/23 Microscope Focusable Eyepiece

This wall light features two opal glass orbs and a vintage-style soft gold finish. Inspired by Sputnik-style lighting fixtures, it's the perfect addition to a contemporary or Mid-Century Modern setting.

Possini Euro Design Mid Century Modern Wall Light Sconce Black Hardwired 17 3/4 inch High 2-Light Fixture Opal Glass Bedroom Bathroom

TUL Permanent Markers Fine Point Silver Barrel Black Ink Pack Of 4 Markers - Office Depot

1KPL2, O-ring Dash 441 Buna N 0.27 Inch - PK2

Direct replacement for Part Numbers: Ace Hardware 46766, American Plumber 152030, W34-OR, Ametek Kleen-Plus 151120-03, OR-34, Culligan 01019184,

Captain O-Ring - Replacement 151120 O-Ring compatible with Pentek Water Filter Housing (3 Pack) [also called 152030, W34-OR, WFAO150, etc)

Directly from One of the Biggest Plumbing Systems Manufacturers 2 PCS Closed Pex-A Expansion Poly PPSU Manifold 3/4 Trunk, 3 1/2 Ports, Lead Free

(Pack of 2) EFIELD 3 Outlets Pex-A Expansion Poly PPSU Closed Manifold: 3/4 Trunk, 1/2 Port (3 Outlets), F1960

Being® 4:1 Reduction Straight Handpiece with narrow cones, Connect to the ISO Type E

1.25 inch Plossl eyepiece set 10mm Apparent FOV: 50 degrees Eye relief: 7 mm 25mm Apparent FOV: 50 degrees Eye relief: 17.5mm

1.25 inch Eyepiece Set PL (10mm + 25mm)

This Lag Pole is used to install the lag screws and wire to hang suspended ceiling grid from the overhead. You will be able to install lag screws and hanger wire from the ground in one motion. No scaffolding or ladder is needed. Use with any 3/8 in. or 1/2 in. drill. Rugged steel construction for all day use on the job site. Used to install lag screws and hanger wire in combination with any 3/8 in. or 1/2 in. drill. Collapsed length - 7 ft. 4 in. Extended length - 16 ft. 11 in.