1/10 Scale Full-Width Front Bumper with Trail Bar for Traxxas TRX4

Full-Size Steel, Welded Front Bumper w/ Trail Bar For The TRX4 Sport Specifications: -190mm wide -Bumper Top Plate sites approx. 20mm above the top of the frame rail. -Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern) - Mounts using existing hardware - Steel construction - Hand Made/Welde
Full-Size Steel, Welded Front Bumper w/ Trail Bar For The TRX4 Sport *Note: trimming required for after-market inner fenders. Specifications:-190mm wide-Bumper Top Plate sites approx. 20mm above the top of the frame rail.**REQUIRES Trimming of body for fitment. Bumper is not made to fit a winch.- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)- Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,-Flat Black: Superficial matte black coating, will scratch under normal use.-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLEMounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.*Recommend hardware mounting kits available at the top of the page as an optional add-on.** Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.