XTC-3D by Smooth-On
Buy XTC-3D by Smooth-On in Canada at low prices online. XTC-3D® High Performance 3D Print Coating XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. It does not melt plastic. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Inexpensive to Use: 1 oz covers 100+ square inches. 90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper. XTC-3D® does not contain VOC's, phthalates or phosphates. Technical MSDS Package Contents: Part A and Part B XTC-3D Instructions Foam Brush 30mL plastic cup Stir stick. Free shipping in Canada on qualifying orders of 3D printer accessories.
TEST ET PRECAUTIONS XTC-3D
XTC-3D Available in the US and Canada - Reynolds Advanced Materials
XTC-3D™ Product Information
XTC 3D - Brush on coating for 3D printed parts - 181g
Smooth-On XTC-3D High-Performance 3D Print Coating
Smooth-On XTC 3D Brush-On Coating - 3DJake International
Smooth-On XTC-3D® Epoxycoating - Meer 3D
3D Printing Finishing
Smooth-On XTC-3D High-Performance 3D Print Coating
Smooth-On XTC 3D Brush-On Coating - 3DJake International
Smooth-On XTC-3D - 3DNet
Smoothing the Surface of a 3D Printed Model Using XTC-3D® Coating